Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
0.250 horsepower coolant motor; chip and coolant shield; chip pan; set of leveling plates; tang driver in tailstock spindle; servo-shift headstock; electric brake and power unit; tapered spindle sleeve centers; hardened and ground, replaceable steel bedways; dual inch/metric dials for crossfeed; dual graduated inch/metric dial for compound; chasing dial
NSN
National Stock Number:
TXT
Description:
Engine Lathe
MRC:
Indicates the type of mount utilized to support the item.AAXX
Mounting Type:
Floor
MRC:
Indicates the type of current whether alternating,direct,or both.ACDC
Current Type:
Ac
MRC:
The center to center distance.ADQR
Center To Center Distance:
30.000 inches
MRC:
Indicates the performance capability of the item or component.AGLD
Performance Type:
Standard duty
MRC:
The purpose for which the item is designed.AKSL
Purpose For Which Designed:
Toolroom
MRC:
Indicates the design type of the item.APGF
Design Type:
Screw
MRC:
The rated horsepower of the electric motor.ASHK
Electric Motor Horsepower Rating:
7.500
MRC:
Indicates the type of bed provided.AWHA
Bed Type:
Solid
MRC:
The number of electric motors provided.AWLX
Electric Motor Quantity:
2
MRC:
The number of spindle speeds provided.BTSZ
Spindle Speed Quantity:
12
MRC:
The minimum to maximum speed limits of the spindle,expressed in revolutions per minute.BTTB
Spindle Speed Range In Rpm:
+45.0/+1800.0
MRC:
A measurement of the rated swing of the item.BTTD
Rated Swing:
15.500 inches
MRC:
A measurement of the swing over the cross slide of the item.BTTG
Swing Over Cross Slide:
9.500 inches
MRC:
The number of thread changes provided.BTWB
Thread Change Quantity:
48
MRC:
Indicates the type of headstock drive provided for turning,rotating,or positioning the mechanism.BTWL
Headstock Drive Type:
Geared head or step cone pulley, back geared
MRC:
The industrial designation or term used to define the headstock center taper size.BTWM
Headstock Center Taper Size Designator:
250 asa standard or 4 morse
MRC:
The length of a straight line which passes through the center of the through hole of a spindle,and terminates at the circumference.BTYP
Hole Diameter Through Spindle:
4.125 inches
MRC:
The number of carriages provided.BTYQ
Carriage Quantity:
1
MRC:
The means used to operate the carriage longitudinal feed.BTYR
Carriage Longitudinal Feed Operation Method:
Hand and power
MRC:
The means used to operate the carriage cross feed.BTYS
Carriage Cross Feed Operation Method:
Hand and power
MRC:
The number of carriage feed changes provided.BTYT
Carriage Feed Change Quantity:
48
MRC:
Indicates the type of gear change provided.BTYW
Gear Change Type:
Quick
MRC:
The minimum and maximum number of threads provided on the item.BTZR
Thread Quantity Range:
+2.0/+112.0 per inch
MRC:
The total electrical voltage.ELEC
Voltage In Volts:
110.0 and 220.0
MRC:
The number of alternating current phases.FAAZ
Phase:
Single/three
MRC:
The cycles per second /hertz/ of the alternating current.FREQ
Frequency In Hertz:
60.0
