MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
18876-13047888 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
MRC:
A recording of the physical,functional,and performance characteristics for an item of supply.TEXT
General Description:
Crimp type pins, crimp pin contacts shall be capable of meeting the tensile strength req, table x, of mil-c-39029; with bulbs removed, insulation resistance shall be determined at room ambient temperature with 500vdc applied as follows: between each conductor; the 500vdc shall be maintained for 5 seconds or less if instrumentation confirms a steady current, the min, reading shall be 200 megohms per mil-std-202, method 302, condition b, identify with army p/n on packaging or container per mil-std-130; protect pins with protective over wrap
