Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Connection end type, first end: hub
NSN
National Stock Number:
TXT
Description:
Nonvehicular Universal Joint
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
4.125 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
Between 0.620 inches and 0.621 inches
MRC:
The number of splines on or in the item.ABSA
Spline Quantity:
18
MRC:
Indicates the type of bearings furnished.ACSK
Bearing Type:
Plain
MRC:
A measurement indicating the diameter-pitch per specific measurement scale of the item.AGJS
Pitch Diameter:
0.4500 inches
MRC:
The number of holes provided for securing the item in a fixed position.AHYF
Securing Hole Quantity:
1
MRC:
The distance from the centerline of the universal joint spider to the hub end,measured along a line parallel to the longitudinal axis of the hub.AMBA
Length From Universal Joint Spider Centerline To Hub End:
Err-070
MRC:
The distance from the centerline of the universal joint spider to the hub end,measured along a line parallel to the longitudinal axis of the hub.AMBA
Length From Universal Joint Spider Centerline To Hub End:
2.000 inches
MRC:
The distance from the centerline of the universal joint spider to the hub end,measured along a line parallel to the longitudinal axis of the hub.AMBA
Length From Universal Joint Spider Centerline To Hub End:
2.125 inches
MRC:
The outside length of the machined surface finish measured along a line parallel to the longitudinal axis of the hub.AMBB
Hub Machined Surface Finish Outside Length:
Err-070
MRC:
The length of a straight line which passes through the center of an unthreaded securing hole,and terminates on the inside circumference.AMBG
Unthreaded Securing Hole Diameter:
Err-070
MRC:
The pressure angle of the spline,expressed in degrees.AXFG
Spline Pressure Angle In Deg:
Err-070
MRC:
A measurement of the longest dimension of a spline,in distinction from width.AXFH
Spline Length:
Err-070
MRC:
An indication of whether or not an outer periphery machined surface finish is included.BSYF
Outer Periphery Machined Surface Finish:
Err-070
MRC:
An indication of whether or not a hub securing hole is included.BTBM
Hub Securing Hole:
Err-070
MRC:
Indicates the location of the securing hole on the item.BTBN
Securing Hole Location:
0.438 in. From end
MRC:
Indicates the type of spline(s) on the end of the shaft.BTBR
Shaft End Spline Type:
Err-070
MRC:
The physical configuration of the outside of the item.BTBZ
Outside Shape:
Err-070
MRC:
The physical configuration of the outside of the item.BTBZ
Outside Shape:
Round
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator (non-core):
Err-090
MRC:
The justification for the assignment of a federal supply class /fsc/ to an item based on the classification of the next higher classifiable assembly.ZZZV
Fsc Application Data:
Torque tube, slat, aircraft
