Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Counterbore diameter: first end, 0.511 in. ; counterbore depth: first end, 0.375 in. ; pitch diameter: first end, 0.469 in. ; second end, 1.000 in.
NSN
National Stock Number:
TXT
Description:
Rigid Shaft Coupling
MRC:
The length of a straight line which passes through the center of the smallest cross section of a spline,and terminates at the circumference.AAUH
Spline Minor Diameter:
0.4390 inches first end and 0.4440 inches first end
MRC:
The length of a straight line which passes through the center of the smallest cross section of a spline,and terminates at the circumference.AAUH
Spline Minor Diameter:
0.9380 inches second end and 0.9430 inches second end
MRC:
The length of a straight line which passes through the center of the largest cross section of a spline,and terminates at the circumference.AAUJ
Spline Major Diameter:
0.5000 inches first end and 0.5010 inches first end
MRC:
The length of a straight line which passes through the center of the largest cross section of a spline,and terminates at the circumference.AAUJ
Spline Major Diameter:
1.1120 inches second end and 1.1130 inches second end
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
1.438 inches
MRC:
The number of splines on or in the item.ABSA
Spline Quantity:
15 first end
MRC:
The number of splines on or in the item.ABSA
Spline Quantity:
16 second end
MRC:
A measurement of the longest straight line across a circular cross-sectional plane.ADAV
Overall Diameter:
1.375 inches
MRC:
The physical configuration of the bore.AGZD
Bore Shape:
Splined both ends
MRC:
The pressure angle of the spline,expressed in degrees.AXFG
Spline Pressure Angle In Deg:
30.000 both ends
MRC:
A measurement of the longest dimension of a spline,in distinction from width.AXFH
Spline Length:
0.3740 inches first end and 0.3780 inches first end
MRC:
A measurement of the longest dimension of a spline,in distinction from width.AXFH
Spline Length:
0.8750 inches second end and 0.8790 inches second end
MRC:
Indicates the type of spline provided.AXYS
Spline Type:
Involute both ends
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Bore counterbore
MRC:
The chemical compound or mechanical mixture properties of which the body is fabricated.CQRG
Body Material:
Stainless steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 5643, cond a assn standard single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Passivate
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-s-5002 military specification single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Plain sleeve
