Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Coolant system w/115.0vac motor and controls
NSN
National Stock Number:
TXT
Description:
Engine Lathe
MRC:
Indicates the type of mount utilized to support the item.AAXX
Mounting Type:
Floor
MRC:
Indicates the type of current whether alternating,direct,or both.ACDC
Current Type:
Ac
MRC:
The center to center distance.ADQR
Center To Center Distance:
40.000 inches
MRC:
Indicates the performance capability of the item or component.AGLD
Performance Type:
Standard duty
MRC:
The purpose for which the item is designed.AKSL
Purpose For Which Designed:
General
MRC:
The name and number of parts supplied with the item which may be required for application.AKYD
Accessory Components And Quantity:
Headstock w/two speed range (20-400rpm low range) and (400-2500rpm high range)1ea; led display indicator 1ea;
MRC:
Indicates the design type of the item.APGF
Design Type:
Screw
MRC:
The rated horsepower of the electric motor.ASHK
Electric Motor Horsepower Rating:
5.000
MRC:
Indicates the type of bed provided.AWHA
Bed Type:
Solid
MRC:
The number of electric motors provided.AWLX
Electric Motor Quantity:
1
MRC:
The number of spindle speeds provided.BTSZ
Spindle Speed Quantity:
2
MRC:
The minimum to maximum speed limits of the spindle,expressed in revolutions per minute.BTTB
Spindle Speed Range In Rpm:
+20.0/+400.0
MRC:
A measurement of the rated swing of the item.BTTD
Rated Swing:
14.000 inches
MRC:
A measurement of the actual swing over the bed of the item.BTTF
Actual Swing Over Bed:
14.812 inches
MRC:
A measurement of the swing over the cross slide of the item.BTTG
Swing Over Cross Slide:
8.375 inches
MRC:
The number of thread changes provided.BTWB
Thread Change Quantity:
45
MRC:
A measurement of the actual swing over the closed gap.BTWG
Actual Swing Over Closed Gap:
21.000 inches
MRC:
Indicates the type of headstock drive provided for turning,rotating,or positioning the mechanism.BTWL
Headstock Drive Type:
Geared head
MRC:
The industrial designation or term used to define the headstock center taper size.BTWM
Headstock Center Taper Size Designator:
6 morse or 4 morse
MRC:
The length of a straight line which passes through the center of the through hole of a spindle,and terminates at the circumference.BTYP
Hole Diameter Through Spindle:
2.062 inches
MRC:
The number of carriages provided.BTYQ
Carriage Quantity:
1
MRC:
The means used to operate the carriage longitudinal feed.BTYR
Carriage Longitudinal Feed Operation Method:
Hand and power
MRC:
The means used to operate the carriage cross feed.BTYS
Carriage Cross Feed Operation Method:
Hand and power
MRC:
Indicates the type of gear change provided.BTYW
Gear Change Type:
Quick
MRC:
The minimum and maximum number of threads provided on the item.BTZR
Thread Quantity Range:
+2.0/+72.0 per inch
MRC:
The total electrical voltage.ELEC
Voltage In Volts:
230.0
MRC:
The number of alternating current phases.FAAZ
Phase:
Three
MRC:
The cycles per second /hertz/ of the alternating current.FREQ
Frequency In Hertz:
60.0
