Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Od of ring as compressed in cylinder
NSN
National Stock Number:
TXT
Description:
Piston Ring
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Plain rectangular, straight face
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the ring.ACXD
Ring Style:
Concentric
Radial Wall Thickness:
Between 0.3800 inches and 0.3900 inches
Overall Width:
Between 0.2470 inches and 0.2490 inches
MRC:
The length of a straight line which passes through the center of the cylinder /engine,compressor,or the like/,and terminates at the inside diameter.ACXZ
Standard Bore Diameter:
12.000 inches
MRC:
The measured amount that the oversize bore exceeds the standard bore diameter.ACYA
Bore Diameter Oversize:
0.005 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the joint.ADTE
Joint Style:
Vertical joint
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Nickel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
K68, koppers co inc mfr ref single material response
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
13344-143925 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
MRC:
The justification for the assignment of a federal supply class /fsc/ to an item based on the classification of the next higher classifiable assembly.ZZZV
Fsc Application Data:
Deaerating heater
