Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Filler foam
NSN
National Stock Number:
TXT
Description:
Cellular Plastic Material
MRC:
An indication of whether or not an object will remain substantially unchanged when subjected to extremely high temperatures.AAAU
Fire Retarding Characteristic:
Not fire retarding
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
15.850 inches
MRC:
A measurement of the smallest dimension of an item,in distinction from length or width.ABNM
Thickness:
6.790 inches
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
24.370 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Aircraft, thunderbolt ii, a-10
MRC:
The condition of the item with respect to the texture of the surface.APEA
Surface Condition:
Rough
MRC:
An indication of the rated density of the item.BDNZ
Density Rating:
1.2 pounds per cubic foot
MRC:
The squeezing load an item can withstand without breaking at 25 percent deflection.CTLY
Compression Strength At 25 Pct Deflection:
0.35 pounds per square inch
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Irregularly shaped - see drawing for details; left long edge tapers to 15.85 wide at top edge & has cutout beginning on far surface, 1.75 from left edge, up at 30 degree angle to edge then up & right to 14.91 from right edge & 2.00 from farside, up & rt to 10.71 from rt & 3.45 from far side, to 8.71 from rt & 0.50 from top, to 4.48 from rt at top, to 0.50 from top at rt edge; top surface has graduated lengthwise angles; rt edge has roughly triangular cutout from near surface to far one, with 15 to 30 degree cuts, ending 4.48 from right edge at far surface; far side is marked: "up fwd" near left long edge, right corner & with part number near the center of that edge
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Plastic, polyurethane
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic polyurethane
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
Material to be reticulated foam per sm-alc specification ms-mmrs-87-100
