Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Filler foam
NSN
National Stock Number:
TXT
Description:
Cellular Plastic Material
MRC:
An indication of whether or not an object will remain substantially unchanged when subjected to extremely high temperatures.AAAU
Fire Retarding Characteristic:
Not fire retarding
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
16.260 inches
MRC:
A measurement of the smallest dimension of an item,in distinction from length or width.ABNM
Thickness:
2.500 inches
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
22.320 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Aircraft, thunderbolt ii, a-10
MRC:
The condition of the item with respect to the texture of the surface.APEA
Surface Condition:
Rough
MRC:
An indication of the rated density of the item.BDNZ
Density Rating:
1.2 pounds per cubic foot
MRC:
The squeezing load an item can withstand without breaking at 25 percent deflection.CTLY
Compression Strength At 25 Pct Deflection:
0.35 pounds per square inch
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Drectangular with 5 cutouts on right/short edge: 1.00wx1.00h, 2.10 & 5.00& 9.60 & 13.70 inches from bottom edge; a cutout on bottom edge: 7.32wx1.16h, 2.96 from left edge; 2 cutouts on left edge: 1.25wx1.00h, 2.84 & 13.00 from bottom; and a rectangular cutout near center: 3.00wx2.00h, 9.00 from bottom and 4.36 from right edge with line cut through from top edge of cutout to top of item, 5.36 from right edge; near side has crosswise grooves: 1.25wx0.50d along left edge and 2.00wx1.50d along right edge and has markings: part number near upper left corner and "up" and "fwd" on w lines to right of part number; far side has semicircular lengthwise cutout with radius 1.00 centered 9.90 inches from bottom edge
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Plastic, polyurethane
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic polyurethane
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
Material to be reticulated foam per sm-alc specification ms-mmrs-87-100
