Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Filler foam
NSN
National Stock Number:
TXT
Description:
Cellular Plastic Material
MRC:
An indication of whether or not an object will remain substantially unchanged when subjected to extremely high temperatures.AAAU
Fire Retarding Characteristic:
Not fire retarding
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
16.360 inches
MRC:
A measurement of the smallest dimension of an item,in distinction from length or width.ABNM
Thickness:
2.500 inches
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
20.890 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Aircraft, thunderbolt ii, a-10
MRC:
The condition of the item with respect to the texture of the surface.APEA
Surface Condition:
Rough
MRC:
An indication of the rated density of the item.BDNZ
Density Rating:
1.2 pounds per cubic foot
MRC:
The squeezing load an item can withstand without breaking at 25 percent deflection.CTLY
Compression Strength At 25 Pct Deflection:
0.35 pounds per square inch
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Rectangular with 2 cutouts on right/shorter edge: 1.25wx1.00h, 2.96 inches from bottom and 1.25wx1.00h, 13.80 from bottom; a cutout on bottom edge, `1.16hx16.73w, 1.16from left edge; a rectangular hole, 10.59wx2.00h, cut thru, 8.90 from bottom and7.30 from left edge; a groove 1.00hx7.30wx1.00d on near side horizontally to left of hole and one 2.0hx3.00wx1.00d on far side horizontally to right of hole; far side has groove 1.15wx1.0d along left crosswise edge; near side is marked with "up" and "fwd" in upper center area and with part number in lower center area
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Plastic, polyurethane
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic polyurethane
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
Material to be reticulated foam per sm-alc specification ms-mmrs-87-100
