Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Filler foam
NSN
National Stock Number:
TXT
Description:
Cellular Plastic Material
MRC:
An indication of whether or not an object will remain substantially unchanged when subjected to extremely high temperatures.AAAU
Fire Retarding Characteristic:
Not fire retarding
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
15.680 inches
MRC:
A measurement of the smallest dimension of an item,in distinction from length or width.ABNM
Thickness:
3.750 inches
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
17.680 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Aircraft, thunderbolt ii, a-10
MRC:
The condition of the item with respect to the texture of the surface.APEA
Surface Condition:
Rough
MRC:
An indication of the rated density of the item.BDNZ
Density Rating:
1.2 pounds per cubic foot
MRC:
The squeezing load an item can withstand without breaking at 25 percent deflection.CTLY
Compression Strength At 25 Pct Deflection:
0.35 pounds per square inch
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Rectangular with 3 cutouts on right/long edge: 1.06wx1.10h, 2.30 from bottom, 3.30wx2, 00h, 6.00 from bottom, and 1.26wx1.58h, 13.80 from bottom; near side has a groove 2.30wx1.00d along bottom edge and one 2.30wx0.68d along top edge and is marked with "up" and "aft" on 2 lines near center top and with part number near upper left corner; far side is tapered -.50 along topedge and has top surface cutout starting from a depth of 2.50 on left/long side, over 4.33 inches to right, then slanting up to meet top edge 5.83 from left edge; right side has similar cutout, starting from depth of 2.50 on right side, 3.64 to left thenslanting up to meet top edge 5.14 from right edge
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Plastic, polyurethane
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic polyurethane
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
Material to be reticulated foam per sm-alc specification ms-mmrs-87-100
