Part Number
DEMIL
Shelf Life
UOM
NIIN
NSN
National Stock Number:
TXT
Description:
Reciprocating Counter
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 6.660 inches and 6.720 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
Between 2.292 inches and 2.332 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
Between 2.173 inches and 2.213 inches
MRC:
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.ABWV
Shaft Diameter:
Between 0.311 inches and 0.313 inches
MRC:
A measurement of the longest dimension of the shaft,in distinction from width.ABXF
Shaft Length:
Between 1.190 inches and 1.250 inches
MRC:
The longest distance between mounting centers parallel to the horizontal plane.AFDS
Longest Horizontal Distance Between Mounting Centers:
Between 3.200 inches and 3.220 inches
MRC:
The longest distance between mounting centers parallel to the vertical plane.AFDV
Longest Vertical Distance Between Mounting Centers:
Between 2.850 inches and 2.870 inches
MRC:
The number of register(s) contained in the item.ANQD
Register Quantity:
1
MRC:
The number of digits displayed on each register of the item.ANQS
Figure Quantity Per Register:
6 single register single tier
MRC:
A measurement from the bottom to the top of the figure.ANQT
Figure Height:
0.345 inches single register single tier
MRC:
The smallest angle of throw required to make one count,expressed in degrees.ANRC
Minimum Angle Throw In Deg Per Count:
50.0 single register single tier
MRC:
The maximum number of counts the item can accomplish in a measured time.ANRE
Maximum Count Rate:
500.0 per minute single register single tier
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the mounting.ANRL
Mounting Arrangement Style:
Four position square/rectangle
MRC:
The mathematical function the register/s/ is designed to perform.AXED
Register Function:
Add single register single tier and subtract single register single tier
MRC:
Indicates the location of the actuating device on the item.AXEG
Actuating Device Location:
Left side single register single tier
MRC:
Indicates the type and number of facilities by which the item is mounted.AXHR
Mounting Facility Type And Quantity:
4 slot
MRC:
Indicates the type of mounting for which the item is designed.BCNX
Mounting Type For Which Designed:
Panel rear single register single tier
MRC:
The means by which the display of the numeral is provided.CSWS
Numeral Display Method:
Drum
MRC:
The readout of the numerals displayed by the item.CSWT
Numeral Readout:
000000 single register single tier and 999999 single register single tier
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Square/rectangular cased
