Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Shaft, pin
NSN
National Stock Number:
TXT
Description:
Straight Shaft
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Circular grooved and externally threaded
First End Groove Width:
Between 0.090 inches and 0.120 inches
First End Groove Diameter:
Between 0.399 inches and 0.404 inches
MRC:
A term used to identify the ends as identical or not identical.AAHN
End Similarity:
Not identical
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Circular grooved and externally threaded
Second End Groove Width:
Between 0.090 inches and 0.120 inches
Second End Groove Diameter:
Between 0.399 inches and 0.404 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
6.380 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Ballistic door, cvn 78 class aircraft carrier
First End Distance From End To Groove:
2.510 inches
MRC:
The length of a straight line which passes through the center of the first end,and terminates at the circumference.AMDL
First End Diameter:
0.500 inches
First End External Thread Length:
2.510 inches
Second End Distance From End To Groove:
0.510 inches
MRC:
The length of a straight line which passes through the center of the second end,and terminates at the circumference.AMFZ
Second End Diameter:
0.500 inches
Second End External Thread Length:
0.510 inches
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Thread size on both ends is 500-13unc-2b; unthreaded center section diameter is 0.630 in (nom)
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 316l
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Astm a276, type 316l assn standard single material response
