Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Knob, indicator-lapes
NSN
National Stock Number:
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
0.376 inches
MRC:
A measurement of the longest dimension of the shank,in distinction from width.AATR
Shank Length:
0.690 inches
MRC:
The length of a straight line which passes through the center of a counterbored portion of a hole,and terminates at the circumference.AAWY
Counterbore Diameter:
Between 0.255 inches and 0.265 inches
MRC:
The depth of the process used to enlarge part of a hole.AAWZ
Counterbore Depth:
0.060 inches
MRC:
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.AAZE
Shank Diameter:
Between 0.790 inches and 0.810 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.AAZF
Shank Style:
Concave
MRC:
An overall measurement between specified points of an item,in distinction from height.ABFY
Overall Depth:
Between 0.740 inches and 0.760 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the shaft accommodation.ABHH
Shaft Accommodation Style:
Counterbored
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
Between 1.110 inches and 1.113 inches
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
Between 1.110 inches and 1.113 inches
Shank Radius:
0.060 inches
MRC:
The means used to attach the item.ABSX
Attachment Method:
Threaded holes
MRC:
An overall measurement of the smallest dimension of an item,in distinction from length or width.ADUM
Overall Thickness:
0.340 inches
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Center of attachment holes located 0.48 from bottom of knob, 120 degrees aprt, helicol coil insert 0.112-40 unc 28 x 1.0 long inserted in each hole. Has a .260 wide cut out on top edge; sides and bottom finish per mil-c-22751, 1 coat mil-p-2337 type ii primer, 2 coats mil-c-22750 coating lusterless gray color no 36231 of fed-std-595
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Round with fin lever
