Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Grooved on external flange 0.750 in. Diameter by 1.250 in. Deep with 0.375 in. Radius at closed end on a 10.250 in. Diameter center line of groove
NSN
National Stock Number:
TXT
Description:
Wearing Ring
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Internal flange w/external locking flange
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
1.750 inches
MRC:
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.ADAR
Body Outside Diameter:
Between 11.621 inches and 11.623 inches
MRC:
The length of a straight line which passes through the center of a body,and terminates at the inside circumference.ADAS
Body Inside Diameter:
Between 8.875 inches and 8.878 inches
MRC:
A measurement of a straight line from the midpoint of a rounded corner to its periphery.ADNU
Corner Radius:
0.750 inches inside right corner
Left Side Flange Thickness:
0.375 inches
Right Side Flange Thickness:
0.375 inches
Distance Between Flanges:
Between 1.005 inches and 1.007 inches
End To Flange Distance:
1.375 inches
Internal Flange Inside Diameter:
7.625 inches
Internal Flange Width:
0.375 inches
Smallest External Anchor Flange Radius:
5.719 inches
Largest External Anchor Flange Radius:
6.032 inches
Distance Below Centerline:
0.094 inches
Distance From End:
0.500 inches
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Round inside right corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square inside left corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square outside left corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square outside right corner
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
125.0 microinches all surfaces
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper alloy
