Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Slotted between both 0.4600 in.Hole centers
NSN
National Stock Number:
TXT
Description:
Gear Rack
MRC:
The means used to attach the item.ABSX
Attachment Method:
Slot
MRC:
The number of teeth included on the item.AJLA
Teeth Quantity:
33
MRC:
A nominal measurement of the smallest dimension of an item,in distinction from length or width.CWCK
Thickness:
0.440 inches
MRC:
The nominal dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.CWFR
Nominallength:
3.250 inches
MRC:
Indicates the type of teeth included on the item.CWMW
Teeth Type:
Spur
MRC:
An indication as to whether the teeth are a standard depth or modified to a shorter depth.CWNH
Tooth Form:
Standard
MRC:
The measurement of the pressure angle on the item.CWPP
Pressure Angle:
14.5000 degrees
MRC:
A measurement taken at right angles to the length of the face,in distinction from thickness.CWRM
Face Width:
0.125 inches
MRC:
The nominal distance from the end of the item to the center of the first mounting hole.CWZS
Distance From End To First Mounting Hole Center:
0.170 inches transversely through side
MRC:
The nominal distance between the center of a mounting hole and the center of an adjacent mounting hole.CWZZ
Center To Center Distance Between Mounting Holes:
0.460 inches transversely through bottom and 1.999 inches transversely through bottom and 0.460 inches transversely through bottom
MRC:
The nominal distance from the center of a mounting hole to the bottom of the item.CXBS
Distance From Mounting Hole Center To Bottom:
0.266 inches transversely through side
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 1015
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Aisi/sae1015 federal standard all material responses
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Square or rectangular
