Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Bracket, aft-inner duct
NSN
National Stock Number:
TXT
Description:
Angle Bracket
MRC:
Indicates the type of holes provided in the item to facilitate mounting to another item.ACHY
Mounting Hole Type:
Plain
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
F101-ge-102
First Leg Hole Diameter:
Between 0.295 inches and 0.309 inches
Second Leg Hole Diameter:
Between 0.274 inches and 0.288 inches
Second Leg Distance Between Hole Centers Along Width:
1.236 inches
MRC:
A measurement of the smallest dimension of the first leg,in distinction from length or width.AHPW
First Leg Thickness:
Between 0.028 inches and 0.036 inches
MRC:
A measurement of the smallest dimension of the second leg,in distinction from length or width.AHPX
Second Leg Thickness:
Between 0.028 inches and 0.036 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first leg.AJZU
First Leg Style:
End radius
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the first leg holes.AKAU
First Leg Hole Arrangement Style:
One hole
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second leg.AKBU
Second Leg Style:
Cut out
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the second leg holes.AKCU
Second Leg Hole Arrangement Style:
Two holes
MRC:
An indication of whether or not the second leg is identical to the first leg.CSSP
Second Leg Relationship To First Leg:
Not identical
First Leg Angle:
Between 89.0 degrees and 91.0 degrees
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Y1st leg contains a nut plate and is bent down 6.0 degrees min to 8.0 degrees max; new inner aft duct bkt p/n 1864m70g01 (19ea) replaces p/n 5053m17g01 but not interchangable. This bkt is 0.050 in. Shorter to accommodate the thicker combustion case mid flange. Ipb must be coded to state 19 aft inner brackets (p/n 1864m70g01, ppn 84214) are required for 9550m17g15 cdn assembly otherwise an interference problem will occur in the field per ge aircraft engines change in design (cid) number 808627
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 630
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 5604 national specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Offset angle
