Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
4 grooves along lg of shank
NSN
National Stock Number:
TXT
Description:
Headed Grooved Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Chamfered
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Flat
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
Between 0.744 inches and 0.748 inches
MRC:
A measurement of the longest effective dimension of an item.ABNZ
Effective Length:
2.750 inches
Undercut Diameter:
0.704 inches
Under Head Length:
2.750 inches
Undercut Width:
Between 0.043 inches and 0.049 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the holes.ABRB
Hole Arrangement Style:
Both end drilled
First Hole Diameter:
0.093 inches
Second Hole Diameter:
0.093 inches
Distance From Centerline Of Hole To End Of Pin:
0.680 inches
MRC:
The center to center distance between holes on the item.ABRF
Center To Center Distance Between Holes:
0.680 inches
First End Taper Length:
0.060 inches
First End Taper Angle:
45.0 degrees
Pin Head Diameter:
1.250 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
32.0 microinches long shank
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
0.250 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 302
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-s-763, cond a federal specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Passivate
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Groove
