Part Number
DEMIL
Shelf Life
UOM
NIIN
NSN
National Stock Number:
TXT
Description:
Compression Helical Spring
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
3.200 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the end.ABQK
End Style:
E4 spring end, squared and ground both ends
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
4.330 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Landing gear component
Spring Free Length:
21.200 inches
MRC:
The length of a straight line which passes through the center of the accommodated rod,and terminates at the circumference.AHQJ
Accommodated Rod Diameter:
3.135 inches
MRC:
The number of coils included on the item.APCN
Coil Quantity:
12 1/2
MRC:
The rated load the item is designed to accommodate.ASZD
Load Rating:
Between 1100.000 pounds and 1200.000 pounds
Spring Solid Length:
6.250 inches
Spring Solid Outside Diameter:
4.200 inches
MRC:
An indication of the coil helix direction.AXLH
Coil Helix Direction:
Right-hand or left-hand
MRC:
The weight,per specific measurement scale,required to deflect the spring.AXLP
Spring Deflection Rate:
82.260 pounds per inch
Spring Free Outside Diameter:
4.200 inches
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Agav
MRC:
The specific extended or compressed spring length under maximum load.CSZP
Spring Length Under Load:
7.500 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Titanium
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
13-v-11cr-al, lb0170-194, north american rockwell corporation mfr ref single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Cylindrical
