Part Number
DEMIL
Shelf Life
UOM
NIIN
NSN
National Stock Number:
TXT
Description:
Piston Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Chamfered ends w/radial slot
MRC:
Indicates whether or not a ferrous alloy object has been subjected to a process whereby the outer portion is made substantially harder than the inner portion or core.AASG
Casehardening Indicator:
Casehardened
MRC:
The included angle of the countersink,expressed in degrees.AATA
Countersink Angle In Deg:
30.0
MRC:
The depth of the process used to enlarge part of a hole.AAWZ
Counterbore Depth:
0.250 inches
MRC:
A measurement between specified points of a groove,in distinction from height.ABGA
Groove Depth:
Between 0.0938 inches and 0.0967 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
Between 1.12380 inches and 1.12470 inches
MRC:
A measurement of the longest dimension of the tapered portion of an item,in distinction from width.ABND
Taper Length:
Between 1.4063 inches and 1.4141 inches
End Chamfer Angle In Deg:
30.0
MRC:
A measurement of the longest dimension of the body,in distinction from width.ADAQ
Body Length:
Between 3.6874 inches and 3.7031 inches
MRC:
A numeric value that reflects the hardness of a metallic item when used in conjunction with a hardness rating scale.AETC
Metallic Hardness Rating:
51.0 rockwell c and 62.0 rockwell c
MRC:
The length of a straight line which passes through the center of the smallest diameter of a bore,and terminates at the circumference.AGWJ
Bore Smallest Diameter:
0.3750 inches
Largest Bore Diameter:
0.8437 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the bore.ANTP
Bore Style:
Inside chamfer, tapered and counterbored
Radial Groove Radius:
0.188 inches
Distance From End To Slot Center:
Between 1.844 inches and 1.859 inches
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Steel 4215 28265
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel 4215 28265
MRC:
The justification for the assignment of a federal supply class /fsc/ to an item based on the classification of the next higher classifiable assembly.ZZZV
Fsc Application Data:
Engine, gasoline, nonaircraft
