Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Two green lines .094 in. Maximum w entire lg; surface luster normal, free from heat tint or discoloration
NSN
National Stock Number:
TXT
Description:
Compression Helical Spring
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
Between 0.532 inches and 0.542 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the end.ABQK
End Style:
E4 spring end, squared and ground both ends
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the end.ABQK
End Style:
Spring end, squared and ground both ends
Spring Free Length:
Between 0.969 inches and 1.063 inches
MRC:
The length of a straight line which passes through the center of the accommodated rod,and terminates at the circumference.AHQJ
Accommodated Rod Diameter:
0.529 inches
MRC:
The number of coils included on the item.APCN
Coil Quantity:
7
MRC:
The rated load the item is designed to accommodate.ASZD
Load Rating:
4.000 pounds
Spring Solid Length:
0.365 inches
MRC:
An indication of the coil helix direction.AXLH
Coil Helix Direction:
Right-hand or left-hand
MRC:
The weight,per specific measurement scale,required to deflect the spring.AXLP
Spring Deflection Rate:
8.000 pounds per inch
Spring Free Outside Diameter:
0.638 inches
MRC:
The specific extended or compressed spring length under maximum load.CSZP
Spring Length Under Load:
Between 0.492 inches and 0.540 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 302
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 5688 assn standard single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Cylindrical
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
Part of compressor pressure limiter assembly for main fuel control, j65 aircraft engine
