Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
0.078 in diameter hole located 0.110 in. From hole center to shank end
NSN
National Stock Number:
TXT
Description:
Headed Shoulder Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Square
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Bevel
Under Head Length:
Between 1.419 inches and 1.421 inches
First Step Diameter:
Between 0.372 inches and 0.374 inches
First Step Length:
Between 1.180 inches and 1.220 inches
Second Step Diameter:
Between 0.197 inches and 0.203 inches
Second Step Length:
Between 0.199 inches and 0.241 inches
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
33.0 rockwell c and 38.0 rockwell c
Pin Head Diameter:
Between 0.550 inches and 0.570 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
125.0 microinches
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
Between 0.250 inches and 0.330 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 4140 or steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-s-624 comp 4140 federal specification 1st material response or ams 6395 comp 4140 assn standard 2nd material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Phosphate
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-std-171 finish 5.3.1.2 or 5.3.2.2 military standard single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Shoulder
