Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
1st end has 4 int. Thd holes 0.190 in. Diameter 0.750 in. D, 10 and 32 unf 2b thd des, alt spaced at 60 and 120 degrees apart on 0.750 in. Diameter bolt circle; 2nd end 2nd crossdrilled hole distance between ctrs 0.500 in., both holes counterbored 0.318 in. Diameter 0.152 in. D; 2nd end flat grooved 0.558 in. D and 0.840 in. Lg, 0.865 in. From end
NSN
National Stock Number:
TXT
Description:
Shouldered Shaft
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Plain
MRC:
A term used to identify the ends as identical or not identical.AAHN
End Similarity:
Not identical
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Cross drilled and circular grooved
Second End Groove Width:
0.0400 inches
Second End Groove Diameter:
0.5940 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
3.300 inches
MRC:
The length of a straight line which passes through the center of the first end,and terminates at the circumference.AMDL
First End Diameter:
1.0400 inches
Second End Distance From End To Groove:
0.275 inches
MRC:
The length of a straight line which passes through the center of the second end,and terminates at the circumference.AMFZ
Second End Diameter:
0.6230 inches
MRC:
The length of a straight line which passes through the center of a hole or body of the second end,and terminates at the circumference.AMGS
Second End Hole Diameter:
0.2040 inches
Second End Distance From Hole Center To End:
1.035 inches
MRC:
A measurement between specified points of the hole at the second end,in distinction from height.AMHD
Second End Hole Depth:
0.562 inches
MRC:
The number of steps provided.ATPC
Step Quantity:
3
MRC:
The length of a straight line which passes through the center of the largest step,and terminates at the circumference.CSPY
Largest Step Diameter:
1.120 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-250, comp 2024, temper t4 federal specification single material response
MRC:
The justification for the assignment of a federal supply class /fsc/ to an item based on the classification of the next higher classifiable assembly.ZZZV
Fsc Application Data:
Automatic pilot servo controls
