Part Number
DEMIL
Shelf Life
UOM
NIIN
NSN
National Stock Number:
TXT
Description:
Radial Drilling Machine
MRC:
Indicates the type of mount utilized to support the item.AAXX
Mounting Type:
Floor
MRC:
The rated power of the electric motor.ABYE
Electric Motor Power Rating:
5.0 horsepower
MRC:
Indicates the type of current whether alternating,direct,or both.ACDC
Current Type:
Ac
MRC:
The electrical current rating,expressed in amperes.AMPS
Current Rating In Amps:
Any acceptable
MRC:
The rated horsepower of the electric motor.ASHK
Electric Motor Horsepower Rating:
5.000
MRC:
Indicates the type of main drive provided for turning,rotating,or positioning the mechanism.BNQL
Main Drive Type:
Electric motor
MRC:
Designates the size of the relative or proportionate dimensions of the arm.BNRH
Arm Size:
3.000 feet
MRC:
The length of a straight line which passes through the center of the column,and terminates at the circumference.BNRJ
Column Diameter:
9.000 inches
MRC:
Designates the commercial taper size of the spindle socket.BNRK
Spindle Socket Taper Size:
4 morse
MRC:
The distance the spindle will travel.BNRL
Spindle Travel Distance:
12.000 inches
MRC:
The maximum distance from the center of the spindle to the column.BNRM
Maximum Distance From Spindle Center To Column:
36.000 inches
MRC:
The minimum distance from the center of the spindle to the column.BNRN
Minimum Distance From Spindle Center To Column:
9.000 inches
MRC:
The maximum distance from the nose of the spindle to the base.BNRP
Maximum Distance From Spindle Nose To Base:
53.000 inches
MRC:
The minimum distance from the nose of the spindle to the base.BNRQ
Minimum Distance From Spindle Nose To Base:
14.000 inches
MRC:
The distance the head will travel on the arm.BNRT
Head Travel Distance On Arm:
27.000 inches
MRC:
A measurement of the longest dimension of the base working surface,in distinction from width.BNRW
Base Working Surface Length:
41.000 inches
MRC:
A measurement taken at right angles to the length of the base working surface,in distinction from thickness.BNRX
Base Working Surface Width:
30.000 inches
MRC:
The drilling capability/ies/ of the item.BNRY
Drilling Capability:
1-3/4 in. Drill capacity in mild steel
MRC:
The number of spindle speeds provided.BTSZ
Spindle Speed Quantity:
12
MRC:
The minimum to maximum speed limits of the spindle,expressed in revolutions per minute.BTTB
Spindle Speed Range In Rpm:
+120.0 to 3000.0
MRC:
The total electrical voltage.ELEC
Voltage In Volts:
220.0
MRC:
The total electrical voltage.ELEC
Voltage In Volts:
440.0
MRC:
The number of alternating current phases.FAAZ
Phase:
Three
MRC:
The cycles per second /hertz/ of the alternating current.FREQ
Frequency In Hertz:
60.0
