Part Number
DEMIL
Shelf Life
UOM
NIIN
NSN
National Stock Number:
TXT
Description:
Aircraft Propeller
MRC:
The length of a straight line which passes through the center of a bolt circle,and terminates at the circumference.ABKG
Bolt Circle Diameter:
6.000 inches
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
0.453 inches
MRC:
The number of mounting holes provided.ABTJ
Mounting Hole Quantity:
8
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
Between 2.251 inches and 2.252 inches
MRC:
A measurement of the longest dimension of a bore.ADGE
Bore Length:
3.563 inches
MRC:
The number of individual blades included.AJLB
Blade Quantity:
2
MRC:
An indication of the type of propeller.AMWD
Propeller Type:
Fixed pitch
MRC:
The direction in which an item is designed to rotate,when viewed axially.AMWW
Rotation Direction:
Right-hand
MRC:
The maximum allowable diameter of the circle produced by the extreme tip of the item.AMWY
Span Maximum Diameter:
7.500 feet
MRC:
An indication of the removability of the blade fairing.AMXA
Err Default:
Err default
MRC:
An indication of the removability of the blade fairing.AMXA
Blade Fairing Removability:
Nonremovable
MRC:
The angle of blade pitch measured from the plane of rotation at a specified location,expressed in degrees.AMXP
Blade Angle In Deg:
26.700
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the hub shaft accommodation.AMYP
Hub Shaft Accommodation Style:
Counterbored forward end w/ adjacent counterbored bolt holes
Hub Forward Face Diameter:
7.000 inches
Hub Aft Face Diameter:
7.000 inches
Forward Counterbore Diameter:
3.875 inches
Forward Counterbore Depth:
1.500 inches
Err Default:
Err default and err default
Mounting Hole Counterbore Diameter:
Between 0.695 inches and 0.705 inches
Mounting Hole Counterbore Depth:
0.688 inches
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.ANNQ
Material And Location:
Aluminum alloy
MRC:
The plating,dip,and/or coating that cannot be wiped off.plating and/or coating is any chemical and/or metallic additive,electrochemical,or mild mechanical process which protects the surface of the item and its location.ANNR
Surface Treatment And Location:
Anodized, mil-a-8625
