Part Number
DEMIL
Shelf Life
UOM
NIIN
NSN
National Stock Number:
TXT
Description:
Fluid Passage Bolt
Extended Washer Diameter:
1.210 inches
Concentric Hole Depth:
1.160 inches
Concentric Hole Diameter:
0.531 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
1.510 inches
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.ACLK
First End Thread Class:
3a
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.ACLL
First End Thread Direction:
Right-hand
MRC:
The shortest straight line between flats,perpendicular to the height.ASDB
Width Across Flats:
0.875 inches
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal thread axis.ATKZ
First End Thread Length:
Between 0.286 inches and 0.321 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the wrenching feature.BBDF
Wrenching Feature Style:
Extended washer
First Diameter From Wrenching Feature:
Between 0.754 inches and 0.758 inches
Second Diameter From Wrenching Feature:
Between 0.690 inches and 0.700 inches
Third Diameter From Wrenching Feature:
Between 0.657 inches and 0.662 inches
Length From Bearing Surface Of Wrenching Feature To End Of First Diameter:
0.080 inches
Length From Bearing Surface Of Wrenching Feature To End Of Second Diameter:
Between 0.745 inches and 0.755 inches
Length From Bearing Surface Of Wrenching Feature To End Of Third Diameter:
Between 0.839 inches and 0.874 inches
First Radial Fluid Hole Diameter:
Between 0.279 inches and 0.286 inches
Second Radial Fluid Hole Diameter:
Between 0.279 inches and 0.286 inches
Distance From First Radial Hole Center To End Of Bolt:
0.930 inches
Distance From Second Radial Hole Center To End Of Bolt:
0.690 inches
Length From Bearing Surface Of Wrenching Feature To Bolt End:
1.160 inches
Wrenching Feature Height:
0.350 inches
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
Between 46.5 rockwell a and 63.0 rockwell a
MRC:
The number of threads per linear inch,including incomplete threads,on a line parallel to the thread axis.CQKK
First End Thready Qty Per Inch (tpi):
16
MRC:
A designator distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.CQMM
First End Thread Series Designator:
Unf
MRC:
The designation which is used for the purpose of general identification of the nominal thread size.CQYM
First End Thread Size:
0.750 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams5645 assn standard single material response
