Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Kstabilized for operation at m65 degrees f to p350 degrees f, retainer od concentric w/bore of inner ring within 0.002in. To 0.005 in. Tir, faces of inner ring sq w/bore within 0.0004 in. Tir, faces of outer ring sq w/od within 0.0004 in. Tir, parallelism of outer and inner ring sides within 0.0004 in. Tir, rockwell hardness rating of ball 58.0 to 62.0, inner and outer rings 58.0 to 64.0 c scale, retainer 55.0 to 80.0 b scale, inner and outer ring raceways 5 to 8 uin aa, balls 1 uin aa, od surface of outer ring 15 to 20 uin aa, bore surface of inner ring 16 to 20 uin aa, cage pockets and retainer bore surface 30 to 125 uin aa, inner ring lips 10 to 20 uin aa, the -04 bearing has a different style outer ring than the -03 and -05 bearing
NSN
National Stock Number:
TXT
Description:
Annular Ball Bearing
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
9.00 millimeters
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
20.00 millimeters
MRC:
The overall length of a straight line which passes through the center of an item,and terminates at the outside circumference.ADGA
Overall Outside Diameter:
37.00 millimeters
MRC:
An additional finishing process by which the surface of an item is altered in respect to polishing,grinding,and the like.AGYE
Surface Finish:
Ground
MRC:
The means used in manufacturing the retainer.AGYF
Retainer Fabrication Method:
Machined
MRC:
The direction of load with respect to the shaft axis.AGZC
Load Direction:
Radial
MRC:
The physical configuration of the bore.AGZD
Bore Shape:
Straight
MRC:
The clearance between the bearing rings and the rolling elements.AKVV
Internal Clearance:
0.0040 inches axial and 0.0060 inches axial and 0.0003 inches radial and 0.0009 inches radial
MRC:
The standard tolerance designation indicating the manufactured limitations of the item as established by the various specifications and standards.CTFZ
Standard Tolerance Designation:
Abec no.3
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper alloy retainer
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel ball
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel inner ring
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel outer ring
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
-3900 91547 mfr ref single material response retainer
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 6440 assn standard single material response ball
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 6440 assn standard single material response inner ring
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 6440 assn standard single material response outer ring
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
40a 4 point ball contact, solid inner and outer rings, non-separable
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
+6903-91547 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
