Part Number
DEMIL
Shelf Life
UOM
NIIN
NSN
National Stock Number:
TXT
Description:
Vehicular Universal Joint Yoke
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
Between 2.247 inches and 2.252 inches
MRC:
The center to center distance between holes on the item.ABRF
Center To Center Distance Between Holes:
Between 1.404 inches and 1.410 inches
MRC:
The number of splines on or in the item.ABSA
Spline Quantity:
19
MRC:
A measurement taken at right angles to the length of a fork,in distinction from thickness.AGBT
Fork Width:
2.550 inches
MRC:
A measurement indicating the diameter-pitch per specific measurement scale of the item.AGJS
Pitch Diameter:
1.188 inches
MRC:
The length of a straight line which passes through the center of the bolt hole,and terminates at the circumference.AHNX
Bolt Hole Diameter:
Between 0.325 inches and 0.332 inches
MRC:
The measurement between specified points of the fork,in distinction from height.AKYX
Fork Depth:
1.410 inches
MRC:
The distance from the centerline of the universal joint spider to the hub end,measured along a line parallel to the longitudinal axis of the hub.AMBA
Length From Universal Joint Spider Centerline To Hub End:
2.340 inches
MRC:
The outside length of the machined surface finish measured along a line parallel to the longitudinal axis of the hub.AMBB
Hub Machined Surface Finish Outside Length:
0.750 inches
MRC:
The pressure angle of the spline,expressed in degrees.AXFG
Spline Pressure Angle In Deg:
30.000
MRC:
A measurement of the longest dimension of a spline,in distinction from width.AXFH
Spline Length:
1.560 inches
MRC:
A measurement from the bottom to the top of the fork, in distinction from depth.BRGT
Fork Height:
3.440 inches
MRC:
An indication of whether or not an outer periphery machined surface finish is included.BSYF
Outer Periphery Machined Surface Finish:
Included
MRC:
An indication of whether or not the hub end is threaded.BSYJ
Hub End Thread Provision:
Threaded
MRC:
An indication of whether or not a hub bore is included.BSYL
Hub Bore:
Included
MRC:
Indicates the type of spline(s) on the end of the shaft.BTBR
Shaft End Spline Type:
Involute
MRC:
A measurement of the longest dimension from the centerline of the universal joint spider to the shaft end,in distinction from width.BTBS
Length From Universal Joint Spider Centerline To Shaft End:
Between 6.530 inches and 6.590 inches
Bearing Recess/keyway Depth:
0.500 inches
MRC:
Indicates the type of connection end on the item.BYRC
Connection End Type:
Flange or hub
