Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Filter radio frequency
NSN
National Stock Number:
TXT
Description:
Radio Frequency Interfere Filter
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 31.438 inches and 31.562 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
21.5 inches
MRC:
A measurement of the longest dimension of the body,in distinction from width.ADAQ
Body Length:
Between 30.985 inches and 31.015 inches
MRC:
An inside measurement from the bottom to the top of an item,in distinction from depth.AFMQ
Inside Height:
Between 20.985 inches and 21.015 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Receiver tran
MRC:
The chemical compound or mechanical mixture properties of which the body is fabricated.CQRG
Body Material:
Aluminum
MRC:
The metallic,nonmetallic,and/or chemical properties with which the body is plated,dipped and/or coated. the treatment is designed to protect the body surface/s/ and cannot be wiped off.CRST
Body Surface Treatment:
Cadmium
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Materials: frame shalle be al aly per ams-qq-a-200/9, honeycomb shall be al aly per mil-c-7438 (.125 hex), gasket shall be copper-clad steel wire mesh per astm b-520 in parallel wih an elastomeric strip per astm-d6576 or equivalent
MRC:
Test conditions and ratings,or environmental and performance requirements that are different,more critical,or more specific than those specified in a governing test data document.SPCL
Special Test Features:
Shielding effectiveness: when measured in accordance with mil-std-285, the shielding effectiveness of the panel assembly shall be 85db at 10ghz plane wave
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
Finish = cadmium plate per sae-ams-qq-p-416
