Part Number
DEMIL
Shelf Life
UOM
NIIN
NSN
National Stock Number:
TXT
Description:
Ship Propulsion Shaft
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
Between 13.380 inches and 13.560 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
30.088 feet
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
Between 20.500 inches and 20.550 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
Between 20.500 inches and 20.550 inches
MRC:
An additional finishing process by which the surface of an item is altered in respect to polishing,grinding,and the like.AGYE
Surface Finish:
Ground or rough machined or smooth machined
MRC:
The length of a straight line which passes through the center of the coupling,and terminates at the outside circumference.AHSU
Coupling Outside Diameter:
35.500 inches
MRC:
The length of a straight line which passes through the center of the intermediate bearing sleeve,and terminates at the outside circumference.AMCD
Intermediate Bearing Sleeve Outside Diameter:
Between 20.621 inches and 20.625 inches
MRC:
A measurement of the longest dimension of the intermediate bearing sleeve.AMCE
Intermediate Bearing Sleeve Length:
3.833 feet
MRC:
Indicates the type of unit.APQB
Unit Type:
Line shaft section
MRC:
Indicates the type of protective covering provided.APZX
Protective Covering Type:
Composition rust preventive
MRC:
The structural characteristic of the item.ARQS
Construction:
Hollow
MRC:
Indicates the location at which the item is to be used.BPJZ
Usage Location:
Starboard
MRC:
The design of the forward end.CPHM
Forward End Design:
Straight
MRC:
The length of a straight line which passes through the center of the forward end,and terminates at the circumference.CPHX
Forward End Diameter:
Between 20.500 inches and 20.550 inches
MRC:
An indication of whether or not a forward end keyway is provided.CPJF
Forward End Keyway:
Not provided
MRC:
An indication of whether or not an after end keyway is provided.CPJG
After End Keyway:
Not provided
MRC:
The design of the forward end coupling.CPJH
Forward End Coupling Design:
Integral
MRC:
The length of a straight line which passes through the center of the forward end coupling,and terminates at the outside circumference.CPJK
Forward End Coupling Outside Diameter:
35.500 inches
MRC:
A measurement of the longest dimension of the forward end coupling,in distinction from width.CPJL
Forward End Coupling Length:
0.442 feet
MRC:
A measurement of the smallest dimension of the forward end coupling,in distinction from length or width.CPJM
Forward End Coupling Thickness:
4.250 inches
MRC:
An indication of whether or not a threaded forward end is included.CPNF
Threaded Forward End:
Not included
MRC:
The design of the after end coupling.CPNK
After End Coupling Design:
Integral
MRC:
A measurement of the longest dimension of the coupling,in distinction from width.CPNM
Coupling Length:
0.354 feet
MRC:
A measurement of the smallest dimension of the coupling,in distinction from length or width.CPTB
Coupling Thickness:
4.250 inches
MRC:
The design of the after end.CPTC
After End Design:
Straight
MRC:
An indication of whether or not a threaded after end is included.CPTD
Threaded After End:
Not included
MRC:
Indicates the location on an item to which a covering has been applied.CPTS
Covering Location:
Surfaces between bearing sleeves and flangefaces, bore surfaces
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Steel, mil-s-23284, class 3
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel, mil-s-23284, class 3
