Part Number
DEMIL
Shelf Life
UOM
NIIN
NSN
National Stock Number:
TXT
Description:
Headed Grooved Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Chamfered
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Flat chamfer
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
Between 0.3120 inches and 0.3125 inches
MRC:
A measurement of the longest effective dimension of an item.ABNZ
Effective Length:
Between 0.110 inches and 0.120 inches
Undercut Diameter:
Between 0.200 inches and 0.202 inches
Under Head Length:
Between 3.190 inches and 3.210 inches
Undercut Width:
Between 0.094 inches and 0.104 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the holes.ABRB
Hole Arrangement Style:
One end drilled
First Hole Diameter:
Between 0.0943 inches and 0.0948 inches
Distance From Centerline Of Hole To End Of Pin:
Between 0.131 inches and 0.161 inches
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
90.0 rockwell superficial 15-n
First End Taper Angle:
Between 29.0 degrees and 30.0 degrees
Pin Head Diameter:
0.625 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
63.0 microinches undercut
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
Between 0.120 inches and 0.140 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp e52100
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 6444 assn standard single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Groove
