Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
First end is circular grooved, 1.739 in. From end, 0.034 in. Width, 0.410 in. Dia; first end is also slotted, 0.125 in. Wide, 0.125 in. Deep
NSN
National Stock Number:
TXT
Description:
Straight Shaft
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Two woodruff keyways
MRC:
A term used to identify the ends as identical or not identical.AAHN
End Similarity:
Not identical
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Two woodruff keyways
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
7.093 inches
MRC:
A measurement taken at right angles to the length of the keyway at the first end,in distinction from thickness.AMCZ
First End Keyway Width:
0.1250 inches
First End External Keyway Length:
0.438 inches
First End Distance From Keyway Center To End:
0.500 inches
MRC:
The length of a straight line which passes through the center of the first end,and terminates at the circumference.AMDL
First End Diameter:
Between 0.4320 inches and 0.4340 inches
First End Angle Between Keyways:
45.0 degrees
MRC:
A measurement taken at right angles to the length of the keyway at the second end,in distinction from thickness.AMFR
Second End Keyway Width:
0.1250 inches
Second End External Keyway Length:
0.438 inches
Second End Distance From Keyway Center To End:
2.531 inches
MRC:
The length of a straight line which passes through the center of the second end,and terminates at the circumference.AMFZ
Second End Diameter:
Between 0.3130 inches and 0.3180 inches
Second End Distance Between Keyway Centers:
2.0000 inches
Second End Angle Between Keyways:
45.0 degrees
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
32.0 microinches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 416
