Part Number
DEMIL
Shelf Life
UOM
NIIN
NSN
National Stock Number:
TXT
Description:
Sprocket Wheel
MRC:
The length of a straight line which passes through the center of the largest cross section of a spline,and terminates at the circumference.AAUJ
Spline Major Diameter:
0.469 inches
MRC:
The length of a straight line which passes through the center of an item,and terminates at the outside circumference.ABHE
Outside Diameter:
1.880 inches
MRC:
The number of splines on or in the item.ABSA
Spline Quantity:
14
MRC:
The length of a straight line which passes through the center of the smallest cross section of a spline,and terminates at the circumference.ABSC
Spline Minor Diameter:
0.406 inches
MRC:
A measurement indicating the diameter-pitch per specific measurement scale of the item.AGJS
Pitch Diameter:
1.670 inches
MRC:
A measurement taken at right angles to the length of the face,in distinction from thickness.AQPL
Face Width:
0.450 inches
MRC:
The physical configuration of the item.ARJD
Design Form:
Plain
MRC:
Indicates the type of bore used on the item.ASBP
Bore Type:
Involute spline
MRC:
The pressure angle of the spline,expressed in degrees.AXFG
Spline Pressure Angle In Deg:
20.0
MRC:
A measurement of the longest dimension of a spline,in distinction from width.AXFH
Spline Length:
0.450 inches
MRC:
An indication of whether or not a counterbore feature is included.AXND
Counterbore Feature:
Not included
MRC:
A measurement of the spline pitch diameter.BDTX
Spline Pitch Diameter:
0.4375 inches
MRC:
The means by which the item is secured.BSNP
Securing Method:
Any acceptable
MRC:
An indication of whether or not a lightening hole/s/ is included.BXSJ
Lightening Hole:
Not included
MRC:
Designates the belt,chain,or film size for which the item is designed.BYFH
Belt/chain/film Size For Which Designed:
Roller chain
MRC:
Indicates the type of roller chain pitch for which the item is designed.BYFJ
Roller Chain Pitch Type For Which Designed:
Single pitch
MRC:
The number of rows of teeth provided.BYFL
Teeth Row Quantity:
2
MRC:
The center to center distance between the teeth rows.BYFM
Center To Center Distance Between Teeth Rows:
0.281 inches
MRC:
The means used to test the rated hardness of an item.BYFQ
Hardness Rating Test Method:
Not rated
MRC:
An indication of whether or not a bore bearing is included.BYFS
Bore Bearing:
Not included
MRC:
The center to center distance between teeth measured along the pitch line.BYGF
Tooth Pitch:
0.174 inches
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Steel, corrosion resisting
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Stainless steel
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Plain
