Part Number 205-040-120-1

Shouldered Washer

Pricing & Availability

Submit this form for current pricing and availability of this NSN.
Part / NSN:
Qty:
Your Email:
Phone:
Ref. / PO #:
Company:
Your Name:

We do not share or sell your information to anyone.
Privacy | Terms

All major credit cards accepted as well as gov. p-cards
Part Number
DEMIL
Shelf Life
UOM
NIIN
Part:
205-040-120-1
Demil:
No
Shelf Life:
UOM:
NIIN:
000710907

Part Information
Two diametrically opposite holes, 0.077 in. Min, 0.082 in. Maximum dia. Located on the shouldered portion, 0.180 in. Nom distance from center of hole to bearing surface of washer. Holes drilled on a 60 degrees angle

NSN
National Stock Number:
5310-00-071-0907 5310000710907
TXT
Description:
Shouldered Washer
INC
INC
Item Name Code:
15934
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
Between 2.423 inches and 2.430 inches
MRC:
The length of a straight line which passes through the center of a shoulder,and terminates at the circumference.AAVH
Shoulder Diameter:
Between 2.562 inches and 2.563 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
Between 2.790 inches and 2.810 inches
MRC:
None.ABMG
Shoulder Height:
Between 0.260 inches and 0.280 inches
MRC:
A measurement of the smallest dimension of the material,in distinction from length or width.ABPX
Material Thickness:
Between 0.080 inches and 0.090 inches
MRC:
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.CQBC
Min. Tensile Strength (psi):
145000 pounds per square inch
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
63.0 microinches all surfaces
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams6381 assn standard single material response or mil-s-5626, cond c1 military specification single material response or mil-s-6758, cond d1 military specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Shouldered

Similar Shouldered Washers

« Nuts and Washers Catalog
Compare Now »
Clear | Hide