Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
W/thd relief 0.020 in.Min, 0.040 in.Max width
NSN
National Stock Number:
TXT
Description:
Rod End Connector
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
3a rod connection
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand rod connection
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
0.220 inches rod connection
MRC:
The distance from the centerline to the axis of the item.ABGG
Radius:
Between 0.084 inches and 0.104 inches
MRC:
The length of a straight line which passes through the center of the shank,and terminates at the outside circumference.AGGZ
Shank Outside Diameter:
0.156 inches
MRC:
A measurement taken at right angles to the length of a tongue,in distinction from thickness.AHHE
Tongue Width:
Between 0.183 inches and 0.193 inches
MRC:
A measurement of the smallest dimension of a tongue,in distinction from length or width.AHHF
Tongue Thickness:
Between 0.073 inches and 0.078 inches
Shoulder Length:
0.531 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the shank.ATCG
Shanklength:
Between 0.240 inches and 0.260 inches
MRC:
A measurement of the longest straight line across a circular cross-sectional plane of a body.AZTN
Bodydiameter:
Between 0.183 inches and 0.193 inches
MRC:
The distance from the end of the item to the center of the hole.BFKT
Distance From End To Hole Center:
0.625 inches
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
36 rod connection
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
0.156 inches rod connection
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-b-944, comp a, 1/2 hard /canceled/ federal specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Connector
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Uns rod connection
