Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Max stress 146000 psi; stress at working lg 58000 psi; deflection lg 0.120 in.; 1.26 wahl factor; 5.860 mean diameter to wire diameter index; all characteristics data proprietary
NSN
National Stock Number:
TXT
Description:
Compression Helical Spring
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
0.203 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the end.ABQK
End Style:
E4 spring end, squared and ground both ends
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
0.310 inches
Spring Free Length:
0.605 inches
MRC:
The length of a straight line which passes through the center of the accommodated rod,and terminates at the circumference.AHQJ
Accommodated Rod Diameter:
0.195 inches
MRC:
The number of coils included on the item.APCN
Coil Quantity:
8 1/2
Spring Solid Length:
0.374 inches
Spring Solid Outside Diameter:
0.306 inches
MRC:
An indication of the coil helix direction.AXLH
Coil Helix Direction:
Right-hand or left-hand
MRC:
The weight,per specific measurement scale,required to deflect the spring.AXLP
Spring Deflection Rate:
Between 48.000 pounds per inch and 52.000 pounds per inch
Spring Free Outside Diameter:
0.302 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Stainless steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Comp 17-7ph, cond c, armco steel corporation mfr ref single material response or e-66, type 17-7ph, moog inc mfr ref single material response or 17-7ph, armco steel corporation mfr ref single material response or 17-7-h, cond c, cold drawn, armco steel corporation mfr ref single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Cylindrical
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
Heat treat/stress relieve per mil-h-6875
