Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Seal windshield
NSN
National Stock Number:
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Solid single or composition
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
11.0 millimeters
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
682.0 millimeters
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
562.0 millimeters
Outside Corner Radius:
20.0 millimeters
MRC:
A measurement taken at right angles to the length of an aperture,in distinction from thickness.ADUE
Aperture Width:
512.0 millimeters
MRC:
A measurement of the longest dimension of an aperture,in distinction from width.ADUF
Aperture Length:
632.0 millimeters
MRC:
A measurement of the center to center distance between the bolt holes along the width.ADUY
Center To Center Distance Between Bolt Holes Along Width:
400.0 millimeters
Outside Edge To Bolt Hole Center Distance Along Width:
12.5 millimeters
Outside Edge To Bolt Hole Center Distance Along Length:
81.0 millimeters
MRC:
A measurement of the smallest dimension of a cross section,in distinction from length or width.ADVM
Cross-sectional Thickness:
10.0 millimeters
MRC:
The number of bolt holes provided on the item.AECS
Bolt Hole Quantity:
6
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
2355-22-622-7966
Outside Edge To Inside Edge Smallest Distance Along Width:
25.0 millimeters
Outside Edge To Inside Edge Smallest Distance Along Length:
25.0 millimeters
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Adhesive one side
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber ethylene-propylene-diene class epdm
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Non-circular
