Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Tray assembly, 1/4 atr short long
NSN
National Stock Number:
TXT
Description:
Electrical Equipme Mounting Base
MRC:
The provision/s/ for mounting the item.ABDR
Mounting Provision:
Nut and screw
MRC:
An overall measurement between specified points of an item,in distinction from height.ABFY
Overall Depth:
Between 12.220 inches and 20.840 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
Between 4.420 inches and 5.020 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
2.385 inches
MRC:
A measurement of the center to center distance between the mounting holes along the width.ADFX
Center To Center Distance Between Mounting Holes Along Width:
1.968 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Aircraft rack and tray installation
Center To Center Distance Between Mounting Holes Along Depth:
19.875 inches
MRC:
The number of mounting facilities provided.AKPV
Mounting Facility Quantity:
4
MRC:
Designates the size of the mounting facility.CXNK
Mounting Facility Size:
6-32 x 5/16
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Tray assembly, 1/4 atr short long includes tray p/n 113-0000-000; connector plate 100-1200-000; washers/an960-d6l p/n 1088; 6-32 x 5/16 flathead screws/nas5701u-5 p/n 1150; 6-32 self-locking nuts/ms21083 p/n 1165; metering plate 100-0001-000; silicone rubber ce-5549u or equivalent seal p/n 100-0000-010
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 6061
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-250/11, t6 federal specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Tray type w/chassis
