Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Scale-shadograph, compressor rotor blades
NSN
National Stock Number:
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
18.00 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
18.00 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
24.00 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
T58-1/-3/-5/-8/-10/-16
MRC:
The measured weight of an item unencumbered by packaging or packing material.AWJN
Unpackaged Unit Weight:
30.00 pounds
MRC:
The total electrical voltage,expressed in volts,and the type of current whether alternating or direct.CSBH
Voltage In Volts And Current Type:
110.0 ac
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Used to determine weight of individual compressor rotor blades during maintenance of engine
MRC:
Describes the capabilities,intended use,and/or purpose for which the item is provided.FTLD
Functional Description:
Scale is graduated in .05 gram increments with a total capacity of 100 grams, the platter of rotor blades for weighing is 4" in diameter of polished aluminum, the remainder of scale units is of steel with non-corrosive finish, enclosed in a wooden cabinet with pull-out shelf
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum and steel and wood
MRC:
Test conditions and ratings,or environmental and performance requirements that are different,more critical,or more specific than those specified in a governing test data document.SPCL
Special Test Features:
Weight: 30lbs, 18 x 18 x 24"
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
No calibration is required on basic unit, however, the weight of the "weights" should be periodically verified
MRC:
A recording of the physical,functional,and performance characteristics for an item of supply.TEXT
General Description:
Operates on 110v, 60hz
