Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Coolant system 1/8 hp; bed 13.50 in. Wd by 15.0 in. Dp; quill tvl 7.0 in.; 3 "v" bed ways construction; carriage cross slide tvl 12.25 in; space rqrd 45 in. By 140 in.
NSN
National Stock Number:
TXT
Description:
Engine Lathe
MRC:
Indicates the type of mount utilized to support the item.AAXX
Mounting Type:
Floor
MRC:
Indicates the type of current whether alternating,direct,or both.ACDC
Current Type:
Ac
MRC:
The center to center distance.ADQR
Center To Center Distance:
80.000 inches
MRC:
Indicates the performance capability of the item or component.AGLD
Performance Type:
Heavy duty
MRC:
The purpose for which the item is designed.AKSL
Purpose For Which Designed:
Toolroom
MRC:
Indicates the design type of the item.APGF
Design Type:
Screw
MRC:
The rated horsepower of the electric motor.ASHK
Electric Motor Horsepower Rating:
15.000
MRC:
Indicates the type of bed provided.AWHA
Bed Type:
Removable block gap
MRC:
The number of electric motors provided.AWLX
Electric Motor Quantity:
2
MRC:
The minimum to maximum speed limits of the spindle,expressed in revolutions per minute.BTTB
Spindle Speed Range In Rpm:
+20.0/+1800.0
MRC:
A measurement of the swing over the cross slide of the item.BTTG
Swing Over Cross Slide:
14.000 inches
MRC:
The number of thread changes provided.BTWB
Thread Change Quantity:
38
MRC:
A measurement of the rated swing through the open gap.BTWC
Rated Swing Through Open Gap:
31.000 inches
MRC:
A measurement of the actual swing through the open gap.BTWD
Actual Swing Through Open Gap:
23.000 inches
MRC:
A measurement of the rated swing over the closed gap.BTWF
Rated Swing Over Closed Gap:
23.000 inches
MRC:
Indicates the type of headstock drive provided for turning,rotating,or positioning the mechanism.BTWL
Headstock Drive Type:
Geared head
MRC:
The industrial designation or term used to define the headstock center taper size.BTWM
Headstock Center Taper Size Designator:
5 morse
MRC:
The number of carriages provided.BTYQ
Carriage Quantity:
1
MRC:
The means used to operate the carriage longitudinal feed.BTYR
Carriage Longitudinal Feed Operation Method:
Power
MRC:
The minimum and maximum number of threads provided on the item.BTZR
Thread Quantity Range:
+2.0/+72.0 per inch
MRC:
The total electrical voltage.ELEC
Voltage In Volts:
220.0
MRC:
The number of alternating current phases.FAAZ
Phase:
Three
MRC:
The cycles per second /hertz/ of the alternating current.FREQ
Frequency In Hertz:
60.0
