Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
10.500 in. Face to face of flange
NSN
National Stock Number:
TXT
Description:
Plug Valve
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the flow.ADQS
Flow Style:
Two-way two port 90 degree plug turn
MRC:
The number of bolt holes provided on the item.AECS
Bolt Hole Quantity:
8 all ends
MRC:
The means used to control the operation of the valve.AQLR
Valve Operation Method:
Manual
MRC:
The physical configuration of the flange.ARKN
Flange Shape:
Round with holes all ends
MRC:
Indicates the type of connection/s/.AWLS
Connection Type:
Flange all ends
MRC:
The maximum pressure at which the item is rated for operation.CQGM
Maximum Operating Pressure:
125.0 pounds per square inch 1st response
MRC:
The maximum pressure at which the item is rated for operation.CQGM
Maximum Operating Pressure:
200.0 pounds per square inch 2nd response
MRC:
The nominal length of a straight line which passes through the center of an item,and terminates at the outside circumference.CWCD
Outside Diameter:
11.000 inches all ends
MRC:
A nominal measurement of the smallest dimension of an item,in distinction from length or width.CWCK
Thickness:
1.000 inches all ends
MRC:
The nominal length of a straight line which passes through the center of the bolt hole,and terminates at the circumference.CWCQ
Bolt Hole Diameter:
0.750 inches all ends
MRC:
The nominal length of a straight line which passes through the center of the bolt circle,and terminates at the circumference.CWCT
Bolt Circle Diameter:
9.500 inches all ends
MRC:
The design of the flange face.CWDF
Flange Face Design:
Plain all ends
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel flow control device and plastic polytetrafluoroethylene flow control device
MRC:
The type of media for which the item is designed.MEDA
Media For Which Designed:
Steam 1st response
MRC:
The type of media for which the item is designed.MEDA
Media For Which Designed:
Water-oil-gas 2nd response
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
This item has been reviewed for asbestos material. The current approved source, 87708, has indicated their part number contained asbestos prior to 1984. They continue to manufacture the same part number without asbestos material after 1984
