Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Drain holes are included; large end has lip
NSN
National Stock Number:
TXT
Description:
S Electrical Insulation Sleeving
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.ABJH
Tempurature Rating:
-55.0 degrees celsius and 225.0 degrees celsius
MRC:
The environmental elements or conditions that an item is designed or protected to resist or withstand satisfactorily.ADZC
Environmental Protection:
Corrosion resistant and flame resistant and mildew resistant and solvent resistant and water resistant
Large End Wall Thickness Of Main Body:
0.160 inches after unrestricted recovery
Large End Wall Thickness Of Main Body:
Any acceptable as supplied
Small End Wall Thickness Of Main Body:
0.160 inches after unrestricted recovery
Small End Wall Thickness Of Main Body:
Any acceptable as supplied
Distance From Intersecting Centerlines To Edge Of Small End:
4.640 inches after unrestricted recovery
Distance From Intersecting Centerlines To Edge Of Small End:
Any acceptable as supplied
Distance From Centerline Of Small End To Edge Of Large End:
2.030 inches after unrestricted recovery
Distance From Centerline Of Small End To Edge Of Large End:
Any acceptable as supplied
Main Body Small End Inside Diameter:
1.000 inches after unrestricted recovery
Main Body Small End Inside Diameter:
3.220 inches as supplied
Main Body Large End Inside Diameter:
2.380 inches after unrestricted recovery
Main Body Large End Inside Diameter:
3.220 inches as supplied
Distance From Top Of Shoulder To Small End Of Main Body:
1.530 inches after unrestricted recovery
Distance From Top Of Shoulder To Small End Of Main Body:
Any acceptable as supplied
Angle Between Large End And Small End Centerlines In Deg:
180.0 as supplied
Angle Between Large End And Small End Centerlines In Deg:
90.0 after unrestricted recovery
MRC:
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.CQBC
Min. Tensile Strength (psi):
1200 pounds per square inch
MRC:
Flexible,capable of being bent,turned or twisted,within limits,without breaking,or rigid,resisting change of form,inflexible.FLEX
Flexibility:
Flexible
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
3.300 inches after unrestricted recovery
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
Any acceptable as supplied
MRC:
A characteristic of light that can be specified in terms of luminance,dominant wavelength,and purity.HUES
Color:
Black
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Plastic, polyolefin, rt-1304, rayclad tubes inc
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic, polyolefin, rt-1304, rayclad tubes inc
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Boot-90 degrees
MRC:
The maximum potential gradient the insulating material can withstand,per unit thickness,without rupture.UKBG
Dielectric Material Voltage Rating Per Unit Thickness:
200.0 volts per military /0.001 inch/
