Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Bracket eye located on external side of flange-15/16 in. Diameter eye
NSN
National Stock Number:
TXT
Description:
Automotive Axle Shaft
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.938 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
42.885 inches
MRC:
The length of a straight line which passes through the center of the largest circular cross section of the tapered portion,and terminates at the circumference.ABQB
Taper Major Diameter:
Between 0.745 inches and 0.750 inches
MRC:
A numeric value that reflects the hardness of a metallic item when used in conjunction with a hardness rating scale.AETC
Metallic Hardness Rating:
34.3 rockwell c and 39.1 rockwell c
MRC:
The length of a straight line which passes through the center of a flange,and terminates at the outside circumference.AHTC
Flange Outside Diameter:
Between 6.250 inches and 6.270 inches
MRC:
A measurement of the longest dimension of the second end spline,in distinction from width.AMGA
Second End Spline Length:
2.500 inches
MRC:
A measurement indicating the diameter-pitch per measurement scale of the second end.AMGF
Second End Pitch Diameter:
1.680 inches
MRC:
A narrative description of the first end.AMQA
First End Type:
Flanged
MRC:
A narrative description of the second end.AMQF
Second End Type:
Splined
MRC:
Indicates the type and number of facilities by which the item is mounted.AXHR
Mounting Facility Type And Quantity:
8 unthreaded hole
MRC:
The number of second end spline(s) provided.BBCF
Second End Spline Quantity:
27
MRC:
An indication of whether or not a first end bearing seat/s/ is included.BNTF
First End Bearing Seat:
Not included
MRC:
Indicates the type of second end spline provided.BNTM
Second End Spline Type:
Involute
MRC:
The pressure angle of the second end spline,expressed in degrees.BNTN
Second End Spline Pressure Angle In Deg:
26.5
MRC:
An indication of whether or not a second end bearing seat/s/ is included.BNTT
Second End Bearing Seat:
Not included
MRC:
An overall measurement of the smallest dimension of the flange,in distinction from length or width.BNYS
Flangethickness:
1.125 inches
MRC:
A measurement of the smallest dimension of the flange at the mounting hole,in distinction from length or width.BNYT
Flange Thickness At Mounting Hole:
0.438 inches
MRC:
The taper of the flange hole/s/ per measurement scale.BNYW
Flange Hole Taper:
6.000 inches per square inch blank
MRC:
The taper of the flange hole/s/ per measurement scale.BNYW
Flange Hole Taper:
6.000 inches per foot
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Steel, aisi 8653
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel, aisi 8653
