Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
With port holes
NSN
National Stock Number:
TXT
Description:
S Electrical Insulation Sleeving
MRC:
The maximum voltage the insulating materials of the item will withstand without resulting in disruptive discharge or deterioration,expressed in volts.AAPB
Dielectric Withstanding Voltage In Volts:
200.0
MRC:
An indication that the level of probability that an item will operate without failure,at a specified rated capability,at a specified temperature,and for a specified period of time,has been established by testing random samples of production lot.AARG
Reliability Indicator:
Not established
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.ABJH
Tempurature Rating:
-55.0 degrees celsius and 150.0 degrees celsius
MRC:
The environmental elements or conditions that an item is designed or protected to resist or withstand satisfactorily.ADZC
Environmental Protection:
Flame resistant and mildew resistant and solvent resistant and water resistant
Large End Wall Thickness Of Main Body:
0.140 inches after unrestricted recovery
Small End Wall Thickness Of Main Body:
0.050 inches after unrestricted recovery
Distance From Intersecting Centerlines To Edge Of Small End:
1.890 inches after unrestricted recovery
Distance From Centerline Of Small End To Edge Of Large End:
0.970 inches after unrestricted recovery
Main Body Small End Inside Diameter:
0.280 inches after unrestricted recovery
Main Body Small End Inside Diameter:
0.580 inches as supplied
Main Body Large End Inside Diameter:
0.880 inches after unrestricted recovery
Main Body Large End Inside Diameter:
1.180 inches as supplied
Distance From Top Of Shoulder To Small End Of Main Body:
0.490 inches after unrestricted recovery
Angle Between Large End And Small End Centerlines In Deg:
45.0 as supplied
Angle Between Large End And Small End Centerlines In Deg:
90.0 after unrestricted recovery
MRC:
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.CQBC
Min. Tensile Strength (psi):
1500 pounds per square inch
MRC:
Flexible,capable of being bent,turned or twisted,within limits,without breaking,or rigid,resisting change of form,inflexible.FLEX
Flexibility:
Flexible
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
1.520 inches after unrestricted recovery
MRC:
A characteristic of light that can be specified in terms of luminance,dominant wavelength,and purity.HUES
Color:
Black
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Rubber, neoprene, rt-501, raychem corp
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber, neoprene, rt-501, raychem corp
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Boot-90 degrees
