Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Reduced od of flange to 2.770 in. R, upper right quadrant; six recessed slots in front face of raised surface; twelve 0.414 in. Diameter through holes in flange, unequally spaced on 6.000 in. Diameter bolt circle
NSN
National Stock Number:
TXT
Description:
Bearing Retaining Plate
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Raised surface w/ aperture
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
6.750 inches
Minor Thickness:
0.140 inches
MRC:
The length of a straight line which passes through the center of an aperture,and terminates at the circumference.ABVL
Aperture Diameter:
2.400 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the mounting hole(s).ADFU
Mounting Hole Arrangement Style:
Vertical centerline
Distance Between Holes Along Width:
6.000 inches
MRC:
An overall measurement of the smallest dimension of an item,in distinction from length or width.ADUM
Overall Thickness:
1.090 inches
MRC:
The length of a straight line which passes through the center of the countersink,and terminates at the circumference.AYRZ
Countersink Diameter:
Between 0.400 inches and 0.440 inches
MRC:
A measurement from the bottom to the top of a raised surface,in distinction from depth.CKSR
Raised Surface Height:
Between 0.390 inches and 0.430 inches
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
16
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
Between 70.0 brinell standard and 90.0 brinell standard
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
0.375 inches
MRC:
The included angle of the countersink.CRSQ
Countersink Angle:
Between 85.0 degrees and 95.0 degrees
Counterbore Diameter:
5.000 inches
Distance From Horizontal Centerline To Center Of Lower Hole:
3.000 inches
Counterbore Depth:
1.500 inches
MRC:
Indicates the type of mounting hole(s) provided on the item.CWJW
Mounting Hole Type:
Round, threaded, countersunk
Inside Raised Surface Diameter:
Between 3.0570 inches and 3.0585 inches
Outside Raised Surface Diameter:
Between 5.125 inches and 5.126 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 355.0
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Sae j453, grade 322-t71 assn standard single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Round
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unc
