Part Number
DEMIL
Shelf Life
UOM
NIIN
Part:
2410nv929712-1m3308-001
Part Information
Hinge, emergency cover, trim control panel
NSN
National Stock Number:
TXT
Description:
Double Angle Bracket
MRC:
Indicates the type of holes provided in the item to facilitate mounting to another item.ACHY
Mounting Hole Type:
Plain
MRC:
A measurement of the longest dimension of the first leg, in distinction from width.ADLK
First Leg Length:
0.517 inches
MRC:
A measurement of the longest dimension of the second leg, in distinction from width.ADLL
Second Leg Length:
0.517 inches
MRC:
A measurement of the smallest dimension of the first leg,in distinction from length or width.AHPW
First Leg Thickness:
0.090 inches
MRC:
A measurement of the smallest dimension of the second leg,in distinction from length or width.AHPX
Second Leg Thickness:
0.090 inches
Center Section Height:
1.800 inches
Center Section Width:
0.547 inches
Center Section Thickness:
0.050 inches
First Leg Angle:
90.0 degrees
Second Leg Angle:
90.0 degrees
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Main surface has 2 each 0.120 inch diameter through holes located centeredat 1.300 inches apart and 0.387 inchesfrom front edge; legs have one through hole each of 0.095 inch diameter located 0.145 inches from bottom edge and 0.093 inches from rear edge; legs also havetwo additional holes each, counterbored at 90 degrees located at 0.338 inches from back and bottom edges
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 6061
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Anodize
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-a-8625e, ty ii, cl 2 military specification single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Adjacent angles
