Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Wire mesh material per 891423-1 (13973); adhesive per mil-a-46106 type ii clear; workmanship specification per 171020 (13973); bonding specification per 893108 (13973); process spes 893203 (13973) chemical film per mil-c-55/11
NSN
National Stock Number:
TXT
Description:
Electronic Shielding Gasket
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Metal and metallic materials
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 9.690 inches and 9.710 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
0.180 inches
MRC:
A measurement of the line segment extending from the center of a circle or sphere to the curve of an inside corner.ADPQ
Inside Corner Radius:
0.090 inches
Outside Corner Radius:
0.250 inches
MRC:
A measurement taken at right angles to the length of an aperture,in distinction from thickness.ADUE
Aperture Width:
Between 6.240 inches and 6.260 inches
MRC:
A measurement of the longest dimension of an aperture,in distinction from width.ADUF
Aperture Length:
Between 8.560 inches and 8.570 inches
MRC:
A measurement of the smallest dimension of a cross section,in distinction from length or width.ADVM
Cross-sectional Thickness:
Between 0.115 inches and 0.135 inches
MRC:
The number of bolt holes provided on the item.AECS
Bolt Hole Quantity:
24
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
An/tyq-2 (v)1&an/tyq-23(v) 2
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 6061 stop
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-250/11 federal specification 1st material response stop
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-c-55 military specification 1st treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Non-circular
MRC:
The document designator of the specification or standard which established the item of supply.ZZZK
Specification Data:
13973-246414 manufacturers specification
