Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Return spring shaft; second end drilled 0.060 - 0.065 in. Dia, 1.54 - 1.57 in. Dp to an adjacent drill through 0.060 - 0.065 in. Dia
NSN
National Stock Number:
TXT
Description:
Shouldered Shaft
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Circular grooved
First End Groove Width:
Between 0.0180 inches and 0.0200 inches
First End Groove Diameter:
Between 0.1740 inches and 0.1760 inches
MRC:
A term used to identify the ends as identical or not identical.AAHN
End Similarity:
Not identical
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Externally threaded and flat keyway
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 3.870 inches and 3.890 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Starter 36e153-4a, f108 engine for kc135r aircraft
First End Distance From End To Groove:
Between 0.0700 inches and 0.0800 inches
MRC:
The length of a straight line which passes through the center of the first end,and terminates at the circumference.AMDL
First End Diameter:
Between 0.1850 inches and 0.1950 inches
MRC:
A measurement taken at right angles to the length of the keyway at the second end,in distinction from thickness.AMFR
Second End Keyway Width:
Between 0.1100 inches and 0.1200 inches
Second End External Keyway Length:
0.060 inches
MRC:
A measurement between specified points of the keyway at the second end.AMFT
Second End Keyway Depth:
0.080 inches
MRC:
The length of a straight line which passes through the center of the second end,and terminates at the circumference.AMFZ
Second End Diameter:
Between 0.4340 inches and 0.4360 inches
Second End External Thread Length:
0.3750 inches
MRC:
The number of steps provided.ATPC
Step Quantity:
5
MRC:
The length of a straight line which passes through the center of the largest step,and terminates at the circumference.CSPY
Largest Step Diameter:
Between 0.620 inches and 0.640 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
16.0 microinches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams6415 assn standard single material response
