Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Caution: vent port at base of regulator must not be plugged or restricted. Inlet/outlet 1/2" npt ports. Uses standard part kit p/n 38-1000-26; positive shut off; 300 series stainless trim; weight 5.5 lbs.; hand dial mark indicates increase/ decrease in pressure setting.
NSN
National Stock Number:
TXT
Description:
Fluid Pressure Regulating Valve
MRC:
The basic material of which the body is fabricated.AAFZ
Body Material:
Steel, federal standard 66, aisi 316/sae 30316
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Straight thru
MRC:
The type of service with which the item is designed to be used.ACKL
Media For Which Designed:
Not specified
MRC:
The element,compound,or mixture of which the seating surfaces are fabricated.ACSH
Seat Material:
Vespel
MRC:
The element,compound,or mixture of which the packing is fabricated.ADQT
Packing Material:
Rubber, buna-n
MRC:
The part that controls the flow through the item.ADQU
Flow Control Device:
Stem and integral disk
MRC:
The number of end connections included in the item.ADQZ
End Connection Quantity:
2
MRC:
The means other than the end connection/s/ by which the item may be mounted.ADZJ
Mounting Facility:
Panel
MRC:
The minimum to maximum limits of outlet pressure of the item.AEVA
Outlet Pressure Range:
+25.0/+4000.0 pounds per square inch
MRC:
Indicates the basic design type used for regulating the item.AEVN
Regulation Type:
1st stage manual, 2nd stage automatic
MRC:
The means used to manually adjust the item.AEVP
Manual Control Method:
Knob
MRC:
The means of providing resistance to the media passing through a valve,whereby the valve is actuated to regulate the flow.AEVR
Valve Loading Method:
Spring
MRC:
The maximum pressure of the media on the inlet side at which an item is designed to operate.AEVZ
Maximum Inlet Pressure Rating:
10000.0 pounds per square inch
MRC:
An indication of whether or not a filter is included.AEWF
Filter:
Included
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.AZKQ
Tempurature Rating:
Between -65.0 degrees fahrenheit and 165.0 degrees fahrenheit
