Part Number
DEMIL
Shelf Life
UOM
NIIN
NSN
National Stock Number:
TXT
Description:
Sleeve Nut
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
3b
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand
MRC:
A measurement of the smallest dimension of a flange,in distinction from length or width.ABKU
Flange Thickness:
Between 0.130 inches and 0.140 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the nut.ACTA
Nut Style:
Sleeve
Nut Diameter:
Between 0.3615 inches and 0.3635 inches
MRC:
A measurement of the longest dimension of the nut,in distinction from width.ACVN
Nut Length:
Between 0.138 inches and 0.142 inches
MRC:
The shortest straight line between flats, perpendiculiar to the height of the flange.AFGG
Flange Width Across Flats:
Between 0.493 inches and 0.502 inches
MRC:
The length of a straight line which passes through the center of a drilled hole,and terminates at the circumference.AGGP
Drilled Hole Diameter:
0.062 inches
MRC:
Indicates the type and number of holes provided.ALET
Hole Type And Quantity:
6 drilled
MRC:
The geometric configuration of the item when viewed in cross section.ANLR
Cross-sectional Shape:
Hexagonal flange
MRC:
The geometric configuration of the item when viewed in cross section.ANLR
Cross-sectional Shape:
Round nut
MRC:
A designation indicating the diameter-pitch combination and the number of threads per measurement scale applied to a series of diameters.BZRR
Thread Series:
Unf
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
28
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
Between 30.0 rockwell c and 38.0 rockwell c
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
0.250 inches
MRC:
The style designation that most nearly corresponds to the appearance of the hole configuration.CRHC
Hole Configuration Style:
Configuration a
MRC:
The included angle of the countersink.CRSQ
Countersink Angle:
85.0 degrees nut and 95.0 degrees nut
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Stainless steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 5616 assn standard single material response
