Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
One projection ea end, 0.037 in. Min and 0.042 in. Maximum lg, 0.185 in. Min and 0.186 in. Maximum dia
NSN
National Stock Number:
TXT
Description:
Headless Grooved Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Square
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 0.860 inches and 0.870 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
Between 0.435 inches and 0.436 inches
MRC:
A measurement of the longest effective dimension of an item.ABNZ
Effective Length:
Between 0.656 inches and 0.661 inches
Undercut Diameter:
Between 0.366 inches and 0.376 inches
Undercut Width:
Between 0.040 inches and 0.045 inches
Second Undercut Width:
Between 0.040 inches and 0.045 inches
MRC:
Indicates whether or not the second end is identical to the first end.CQBB
Second End Relationship With First End:
Identical
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
40.0 rockwell c and 48.0 rockwell c
MRC:
Indicates the location of the first end.CRDY
First End Location:
Both ends
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
63.0 microinches outside diameter
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 630
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 5643 assn standard single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Passivate
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Qq-p-35 federal specification single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Groove
